Gardens Prepared Before Dormancy Takes Hold
Winterization in West Lake Hills for landscapes showing tender plantings, irrigation lines, and stonework vulnerable to cold-damage cycles
West Lake Hills properties tend to feature mature, layered landscapes built around native limestone outcroppings, established live oaks, and ornamental plantings that vary widely in cold hardiness. Sanctuary Stone & Garden provides winterization service in West Lake Hills and Austin for property owners whose landscapes include irrigation systems, container plantings, tender perennials, and stone or hardscape features that require deliberate preparation before temperatures drop. Without that preparation, irrigation backflow assemblies crack, tropical specimens die back to the root rather than dormancy, and stone surfaces absorb moisture that compromises mortar joints over repeated cold events.
Winterization work begins with a full walk of the property to identify which plantings are cold-hardy in place, which require mulching or cover, and which should be relocated to a sheltered area before a cold event. Irrigation systems are blown out using compressed air to clear standing water from lateral lines, valves, and heads—a step that protects polyethylene supply lines common in residential systems installed in the 1990s through 2000s, which become brittle when water freezes inside them. Stone features, including mortared walls, water features, and container planters, are drained and, where applicable, sealed or covered to prevent surface spalling.
Arrange an on-site walkthrough with Sanctuary Stone & Garden to assess which landscape systems and plantings require preparation before the first cold event of the season.
How Winterization Protects Landscape Systems Correctly
A proper winterization sequence follows the water: shut-off valves are closed at the source, then each zone is pressurized with a commercial compressor rated to the system's line diameter so that air volume—not pressure—moves water out of every lateral run. Oversized compressors can damage PVC fittings; undersized ones leave water in low points where lines dip beneath grade. Sanctuary Stone & Garden sizes the blowout to the system, working zone by zone and confirming heads pop and retract before moving to the next zone.
After irrigation work is complete, you will notice heads sit flush, the backflow preventer is drained and insulated, and the controller is set to its off or rain-delay mode so accidental activation does not send air through a dry system. Stone planters and water features on the property will be drained and either covered or repositioned so standing water cannot collect in basins or cracked mortar cavities. Tender plantings flagged during the initial walkthrough will be mulched to a depth that insulates the root zone without smothering the crown.
Winterization does not include replanting, structural masonry repairs, or plant replacement for specimens that did not survive a prior season—those are handled as separate scopes. What it does include is a documented checklist of every system and planting addressed, so you have a clear record of what was done and what to monitor through the dormant period.
What Property Owners Ask About Winterization Work
Landscapes in West Lake Hills often combine irrigation infrastructure from different installation eras with stone features and mixed plantings that each respond differently to cold preparation. These questions address how the work is actually performed.
What does the compressed-air blowout process actually do to protect irrigation lines?
Compressed air forces standing water out of lateral lines, valve bodies, and spray heads so no water remains to expand if temperatures drop below freezing; each zone is run separately until heads cycle dry, confirming the line is clear before the technician moves on.
How is the approach different for drip irrigation versus spray zones?
Drip emitters and micro-tubing hold less volume but are more sensitive to sediment and pressure spikes, so drip zones are blown at lower pressure with shorter bursts to avoid damaging emitter caps or inline filters that are common in newer landscape installations.
What happens to stone water features and basins during winterization?
Pumps are removed and stored, water is drained completely from the basin and all connecting lines, and open stone surfaces are checked for existing mortar cracks where trapped moisture would accelerate damage during cold nights.
Why do some plants get mulched while others get relocated or covered?
Cold hardiness depends on the plant's root zone temperature tolerance, not just the air temperature above it; mulching protects the root zone for plants that can handle top dieback and return, while specimens with no cold tolerance need physical protection or indoor staging to survive intact.
How do you determine which plantings in an established landscape are actually cold-sensitive?
During the initial walkthrough, plantings are identified by species and assessed against their documented cold-hardiness range; tropicals, succulents outside their native range, and recently installed specimens with shallow root systems are flagged first because they have the least established buffer against a cold event.
Sanctuary Stone & Garden also performs winterization service in Austin for properties with comparable landscape systems and mixed plantings. To schedule a property walkthrough and receive a documented winterization plan for your site, contact Sanctuary Stone & Garden directly to set up an on-site assessment before cold temperatures arrive.

